Looking for in-wall wire concealment in Plaza Midwood, NC? KhatiCo serves Plaza Midwood (3 miles from Uptown Charlotte) with same-day appointments and a 2-technician crew on every install. In-wall wire concealment is the cleanest way to mount a TV — no visible cables, no surface raceways, just the TV on the wall like it grew there. Our Charlotte team installs it as a flat $40 add-on to any standard mount. Most homes are perfect candidates: drywall walls with stud bays where we can run code-compliant low-voltage cables vertically from the TV down to a power outlet behind the entertainment console.
Plaza Midwood is one of Charlotte's coolest hipster neighborhoods, with 1920s-1940s craftsman bungalows, modern infill homes, and a vibrant dining scene. We mount TVs throughout Plaza Midwood — bungalow plaster walls, modern condos, and everything in between.
When you mount a TV without wire concealment, you typically end up with a black HDMI cable and white power cable visible against the wall. Surface raceways (plastic channels) hide them but still leave a visible bump on the wall. True in-wall concealment routes the cables INSIDE the wall through the stud bay — invisible, code-compliant, and permanent. We use a recessed power kit (an in-wall outlet near the TV plus a low-voltage HDMI/power passthrough plate near the floor), drill bypass holes through the top and bottom plates of the stud bay, and fish the cables down. The whole process takes 20-40 minutes for a standard installation. The result: a TV that looks like it floats on the wall with zero visible cables. We use UL-listed low-voltage rated materials per electrical code — important because regular HDMI/power cables are not rated for in-wall use and can be a fire hazard. Our installation is fully compliant with the National Electrical Code (NEC) Article 800.
We locate studs, check for fire blocks, insulation, or HVAC ducts in the bay. If the wall is suitable, we proceed.
Two precise holes — one behind the TV mount, one near the floor outlet. We drill through top/bottom plates as needed.
UL-listed in-wall power kit at TV height. Low-voltage HDMI passthrough plate at floor height. Both flush with the wall.
HDMI, power, optional ethernet routed through stud bay using fish tape and proper bend radius.
TV plugged into recessed outlet, source devices connect at floor plate. Full picture/sound test before we leave.
Coverage zip codes: 28205.
Get an instant price in 30 seconds — or call and book directly.